“Passkeys,” the secure authentication mechanism built to replace passwords, are getting more portable and easier for organizations to implement thanks to new initiatives the FIDO Alliance announced on Monday.
Does it require an array of fucking containers and a flurry of webAPI calls? Then no.
I still have no idea how to use passkeys. It doesn’t seem obvious to the average user.
I tried adding a passkey to an account, and all it does is cause a Firefox notification that says “touch your security key to continue with [website URL]”. It is not clear what to do next.
After my password manager auto filled a password and logged me in the website said “Tired of remembering passwords? Want to add a passkey?” I didn’t know what it meant so I said no lol.
deleted by creator
I think you actually have to buy a passkey device. Then configure it to work with a particular account.
You plug the passkey into your computer and then whenever it asks for a password you literally touch it and it does its thing. I think there are options like biometrics that you can add on top but you don’t have to have that.
Devices themselves can act as passkeys too - I.e. your phone, laptop etc…
…except the ones that can’t
I think it depends on whether you have a TPM chip in it
Thanks for clarifying
If that’s what’s needed, I can say with some certainty that adoption isn’t going to be picking up any time this decade.
They’ve been around forever as a concept I think I even have one for accessing some servers at work. You’re right no one uses them.
ITT: Incredibly non-technical people who don’t have the first clue how Passkeys work but are convinced they’re bad due to imaginary problems that were addressed in this very article.
This is a weird thread. Lots of complaints about lock in and companies managing your keys, both of which are easily avoidable, the exact same way you’d do so with your passwords.
Also the people talking about added complexity? I’m convinced all the complaints are from people who haven’t set one up or used one and are immediately writing it off. Adding one is a single click of a button.
Then to sign in I literally just get a thumbprint request on my phone after entering my username. It’s far far simpler than passwords and MFA.
If the passkeys aren’t managed by your devices fully offline then you’re just deeper into being hostage to a corporation.
That’s a great way to lose access if your device gets lost, stolen, or destroyed. Which is why I’m against and will continue to be against forcing 2FA and MFA solutions onto people. I don’t want this, services don’t care if we’re locked out which is why they’re happy to force this shit onto people.
Well yeah, that is true. Security and convenience are usually at odds… MFA has place, unless you don’t mind some guy from russia access your online bank account ; but I definitely wouldn’t use it on all my accounts.
Yeah and since Online bank accounts can also almost always be reset if you lose the 2FA/MFA key by calling customer support, or going to your bank and speaking with themt in person, there’s almost no risk of losing access completely. It’s a service you have access to because you’re you. Something that isn’t the case with Reddit, Github, Lemmy accounts, or Masotodon. I’m not able to regain access after losing those 2FA solutions by virtue of being myself, they treat you just like the attacker in those cases. Really not worth it there, both since what is being protected isn’t worth it, and the risk far outweighs it.
Access to my main email account (outlook) is currently blocked because someone decided to try a password from some earlier leak and locked it. It can only be unlocked with SMS MFA, which I can’t use because I’m travelling abroad. There is no other way to do it. The other option they give you a form that only works if you don’t have MFA set up (it says so on the faq). I even asked someone to fill the form from my home computer so the location data matches earlier accesses, but didn’t work. You also can’t contact support without logging in. If I had lost/changed that phone number for any reason, I would lose access forever. Luckily I will be back home soon.
Y’all here talking so smart ignore another thing - the more complex your solutions are, the deeper you are into being hostage to everyone capable of making the effort to own you.
Don’t wanna be hostage - don’t use corporate and cloud services for things you need more than a bus ticket.
You are being gaslighted to think today’s problems can be solved by more complexity. In fact the future is in generalizing and simplifying what exists. I’m optimistic over a few projects, some of which already work, and some of which are in alpha.
Thank goodness you didn’t mention any names
Projects don’t react too well to premature attention.
Not to mention Apple let’s you SHARE them with airdrop.
The lock-in effect of passkeys is something that this protocol aims to solve though. The “only managed by your device” is what keeps us locked in, if there is no solution to export and import it on another device.
The protocol aims to make it easy to import and export passkeys so you can switch to a different provider. This way you won’t be stuck if you create passkeys e.g. on an Apple device and want to switch to e.g. Bitwarden or an offline password manager like KeyPassXC
The specifications are significant for a few reasons. CXP was created for passkeys and is meant to address a longstanding criticism that passkeys could contribute to user lock-in by making it prohibitively difficult for people to move between operating system vendors and types of devices. […] CXP aims to standardize the technical process for securely transferring them between platforms so users are free […].
And who forces all the corps to correctly implement that protocol? Getting you locked in is in all of their interests, after all.
I think it‘s fair to remain skeptical but the big organizations were part of the development, so there seems to be some interest. And it‘s not always in their interest to lock users in, when it also prevents users from switching to their platform.
Development of technical standards can often be a fraught bureaucratic process, but the creation of CXP seems to have been positive and collaborative. Researchers from the password managers 1Password, Bitwarden, Dashlane, NordPass, and Enpass all worked on CXP, as did those from the identity providers Okta as well as Apple, Google, Microsoft, Samsung, and SK Telecom.
That’s between platforms though. I like my stuff self-managed. Unless it provenly works with full offline solutions I’ll remain sceptical.
I like my stuff self-managed.
Bitwarden / Vaultwarden is a popular available working solution for self-hosting and self-managing passkeys (as well as passwords).
TBH I don’t see a reason why something as simple as a password manager needs a server, selfhosted or not. I don’t get the obsession with syncing everything, so would rather stick with normal KeepassXC.
Have you never lost your password device (phone, laptop, etc) suddenly and unexpectedly? That’s when you really want that file synced somewhere else. But then it’s too late. Bonus on many password vault servers is shared folders, so one can share their garage door code with the family but keep the bank account details to oneself.
No, but this is very unlikely because I do keep regular backups manually. I just don’t feel the need for it to be a constantly-online server.
not the first time i hear this though. im skeptical until proven otherwise
The real problem is not passwords so much as trusted sources. Governments should have an email account that citizens have a right to and will not go away and have local offices to verify access issues.
I don’t want my government hosting my email.
The last time they had to do anything important they stoled all the sensitive data in plain text in an Excel spreadsheet and then the spreadsheet got corrupted so they lost everything. Of course they didn’t have backups.
But at least since it was stolen, the backup was hosted for free on the hacker forums /s
No. Wtf no.
I bet the gov would love to host your email and have access to all the same info Google does…
Whatever you’re smoking, do less of that
Literally just use a password manager and 2/MFA. It’s not a problem. We have a solution.
Actually, it is still a problem, because passwords are a shared secret between you and the server, which means the server has that secret in some sort of form. With passkeys, the server never has the secret.
The shared secret with my Vaultwarden server? Add mfa and someone needs to explain to me how passkeys do anything more than saving one single solitary click.
When a website gets hacked they only find public keys, which are useless without the private keys.
Private keys stored on a password manager are still more secure, as those services are (hopefully!) designed with security in mind from the beginning.
Pass keys are for websites such as Google, Facebook, TikTok, etc. And then they go into what is currently your password manager or if you don’t have one, it goes into your device. You still have to prove to that password manager that you are, who you say you are, either by a master password of some sort or biometrics.
Best password manager is offline password manager.
KeepassXC makes a file with the passwords that is encrypted, sharing this file with a server is more secure than letting the server manage your passwords
This is not at all relevant to the comment you’re responding to. Your choice of password manager doesn’t change that whatever system you’re authenticating against still needs to have at least a hash of your password. That’s what passkeys are improving on here
I agree, and that’s my method as well. Although I do not ever share the file with a server either. I only transfer it from device to device with flash drives or syncthing.
I do that too, I have my own server in my basement for storage
Look at us. A bunch of people who don’t trust society. LOL.
You can share passwords without the server seeing them. Many managers don’t but there’s nothing infeasible there. You just have a password to unlock the manager. Done.
What I’m getting at is that a web server has a password, in some form. And so if that site gets breached, your password itself may not get leaked, but the hash will. And if the hash is a common hash, then it can be easily cracked or guessed.
Not anything sufficiently modern. Salted passwords should be exceedingly difficult to reverse.
Ultimately I’m pro passkey but when it comes to password managers: if the hash of your vault is easy to crack you’ve fucked up big time. There shouldn’t be any way to crack that key with current tech before the sun explodes because you should be using a high entropy passphrase.
Oh, you absolutely should. And if you are not, that is nobody’s fault except your own.
Never forget that technologically speaking you’re nothing like the average user. Only 1 in 3 users use password managers. Most people just remember 1 password and use it everywhere (or some other similarly weak setup).
Not remembering passwords is a huge boon for most users, and passkeys are a very simple and secure way of handling it.
I work for multiple organizations. The majority of which have a Google sheet with their passwords in that are
c0mpanyname2018!Those that aren’t are
pandasar3cute123?At one point the organization I work for had a password that was literally
Password-022!, guess what it was the following month?I had to start hashing passwords and sending it to the haveibeenpwned API.
I also fight with my users over data normalization because any time I add some rule (like don’t put “SO#” as part of the value of the “SO#” field), they’re too stupid to realize the point and find some other “hack” around it.
Exactly.
I mean, it is. Aside from an additional associated cost, it’s still much less convenient.
I’ll switch when it’s fully implemented in open source and only I am the one with the private key. Until then its just more corporate blowjobs with extra steps.
What do you means by this? What part do you want to be open source? Passkey are just cryptographic keys, no part of that requires anything unfree. There’s aready an open source authentication stack you can use to implement them. You can store them completely locally with KeyPassXC for selfhost Vaultwarden to store them remotely. Both are open source?
That’s exactly how passkeys work. The server never has the private key.
KeePass has passkey support
And we all remember the huge drama about it because they allowed for taking the keys out and backup them up.
I think a big part of it was exporting them plain text by default. I’m in the “I know what I’m doing” camp but I guess for someone who doesn’t that sort of handholdy stuff not allowing the export them without encryption stuff makes sense.
Passkeys are an ancient authentication setup, have always been better than passwords and are finally getting traction.
You can add them in vaultwarden.
If you tell corporations there’s a way to increase lock-in and decrease account sharing, they’re gonna make it work.
One is a new technical specification called Credential Exchange Protocol (CXP) that will make passkeys portable between digital ecosystems, a feature that users have increasingly demanded.
I.e. I can copy my key to my friends’ device.
I believe that’s Apple talking to Google, not anything local you can own.
Read the article, it’s literally about replacing Import/Export CSV plaintext unencrypted files with something more secure.
I.e. moving your passwords/passkeys between password managers. This is not about replacing stuff like OAuth where one service securely authorizes a user for another.
It’s gonna work with KeePass and Bitwarden once it’s finalized.
I’d love to see that.
I’m not in software but from what I read the importer sends a request and that request is used by the exporter and importer to encrypt and decrypt, so I think there’s a way to tweak the whole process a little and instead have both the exporter and importer ask Netflix or whoever to provide a key as opposed to using the request. Could be wrong tho
That’s not how Passkey, and the underlying WebAuthn works.
(Highly simplifies but still a bit technical) During registration, your key and the service provider website interacts. Your key generated a private key locally that don’t get sent out, and it is the password you hold. The service provider instead get a puclic key which can be used to verifiy you hold the private key. When you login in, instead of sending the private key like passwords, the website sent something to your key, which needs to be signed with the private key, and they can verify the signature with the public key.
The CXP allows you export the private key from a keystore to another securely. Service providers (Netflix) can’t do anything to stop that as it doesn’t hold anything meaningful, let alone a key (what key?), to stop the exchange.
Thanks for this, from a non techie
So basically cert exchange when you want to ssh without passwords?
Pretty much, yeah.
What is the difference between a crypto wallet and a passkey?
Is it just that a passkey has less functionality (and therfore better usability)?
Am skeptical
I always feel like an old granny when I read about passkeys because I’ve never used one, and I’m worried I’ll just lock myself out of an account. I know I probably wouldn’t, but new things are scary.
Are they normally used as a login option or do they completely replace MFA codes? I know how those work; I’m covered with that.
It’s not unreasonable at all. I locked myself out of several accounts after everyone recommended keypass for TOTP and then I lost all the keys. Getting those accounts back was a fucking nightmare.
I have passkeys setup for almost everything and on most sites I just enter my username then I get a request on my phone to sign in. Scan my thumbprint and it’s good to go. It’s actually so much simpler than passwords / MFA, but admittedly I haven’t had to migrate devices or platforms.
I have everything setup through protonpass right now
Usually just an option in addition to a password + MFA. Or they just replace the MFA option and still require a password. I even saw some variants where it replaced the password but still required a MFA code. It’s all over the place. Some providers artificially limit passkeys to certain (usually mobile) platforms.
All of those options are to NIST-spec. MFA means multi-factor. It doesnt matter what they are as long as they are in different categories (something you know, something you have, something you are, etc: password, passkey, auth token, auth app, physical location, the network you are connected to). Two or more of these and you are set (though, location might be a weak factor).
I’m not convinced this is a good idea. Resident keys as the primary mechanism were already a big mistake, syncing keys between devices was questionable at best (the original concept, which hardware keys still have, is the key can never be extracted), and now you’ve got this. One of the great parts about security keys (the original ones!) is that you authenticate devices instead of having a single secret shared between every device. This just seems like going further away from that in trying to engineer themselves out of the corner they got themselves into with bullshit decisions.
Let me link this post again (written by the Kanidm developer). Passkeys: A Shattered Dream. I think it still holds up.
The author of your blog post comes to this conclusion:
So do yourself a favour. Get something like bitwarden or if you like self hosting get vaultwarden. Let it generate your passwords and manage them. If you really want passkeys, put them in a password manager you control. But don’t use a platform controlled passkey store, and be very careful with security keys.
The protocol (CXP) which the article is about, would allow you to export the passkeys from the “platform controlled passkey store” and import them into e.g. Bitwarden. So i would imagine the author being in favor of the protocol.
My password manager supports passkeys just fine, across Windows, macOS, Linux and iOS (and probably Android but I haven’t tried). Surprisingly, iOS integrates with the password manager so it’s usable just like their own solution and it works across the system (not just in the browser).
This seems to be more about finding a standard way to export/import between different password managers/platforms?
Correct. The spec is about making it easier and more secure to export your passwords and passkeys when you move from one password manager to another. People are misunderstanding this as some sort of federated authentication system to share your credentials between multiple password managers at the same time, which it is not.
Whenever I read stuff like this, my mind goes a bit hazy. Because I’m just finding myself asking ‘Why and when did the simple mechanic of passwords get this difficult?’
Maybe if password requirements weren’t stingingly stupid, companies cared more about actual security and not an obstacle course they’ve gotta send people through to do one thing. We wouldn’t ever know or need to know systems like this.
Passkeys are much simpler to use than passwords, password managers, 2FA etc. if simplicity is your goal, Passkeys are your personal wet dream.
That one site - what was it, Mozilla’s/Gnome’s git? - that needed Aegis for login. Which is unlocked by pasword btw.
‘Why and when did the simple mechanic of passwords get this difficult?’
When and because people started storing all their intimate personal details on the internet and hackers sought to exploit those details.
Maybe if password requirements weren’t stingingly stupid, companies cared more about actual security and not an obstacle course they’ve gotta send people through to do one thing.
The obstacle course is the security, unfortunately. That’s the problem this aims to solve.
With passkeys you never need to worry about the storage method used by the site. Some sites STILL store passwords in plaintext. When that database gets hacked, it’s game over.
A public passkey, even stored in plaintext, is useless to an attacker.
Maybe that doesn’t matter for you or me, with our 64-character randomly generated passwords unique to each service, but the bigger picture is that most people just use the same password everywhere. This is how identity theft happens.
It’s enough to read the title. The rest of the article doesn’t provide much else other than being one step closer. 😄